Motorola APX 1000 Basic Service Manual page 455

Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies
8.5.3.2 Servicing Back Label
NOTE: There is no need to remove any component in order to service the Back Label.
1. Scrap off the Back Label with the Black Stick.
2. Clean the area once the Back Label is completely removed to ensure it is free of adhesive
and debris.
3. Remove the label off its backer and place it in the recess.
4. Press the new replacement label for 10 seconds.
8.5.3.3 Servicing Bottom Label
NOTE: There is no need to remove any component in order to service the Bottom Label.
1. Scrap off the Bottom Label with the Black Stick.
2. Clean the area once the Bottom Label is completely removed to ensure it is free of adhesive
and debris.
3. Remove the label off its backer and place it in the recess.
4. Press the new replacement label for 10 seconds.
!
a u t i o n
Refer to qualified service personnel and service shops to service the Bottom
Label with UL certification.
8-21