Motorola APX 1000 Basic Service Manual page 216

7-8
2. After the Chassis (26) is disengaged, slide the chassis assembly down and lift it away from
the Front Kit (A) and lay both sub-assemblies on the anti-static mat (part of anti-static ground
kit) as shown in
7.4.5.2 Removal of the Chassis Screws (15)
1. Remove the black chassis screws (15) as shown in
7.4.5.3 Removal of the Main Board(16)
1. Remove the Main O-Ring (25) at the antenna holder as shown in
2. Lift up the Main Board (16) from the Chassis (26) towards the Front Housing (2) and gently
unplug the connectors from the Front Kit Flex and Keypad Flex (11) to remove the Main
Board as shown in
Figure 7-8.
Figure 7-8. Remove the Chassis Assembly
Figure 7-9. Remove the chassis screws
Figure 7-10. Remove the Main O-Ring at the antenna holder
Figure 7-11.
Disassembly/Reassembly Procedures: Radio Disassembly
Figure 7-9.
and Figure 7-12 respectively.
Chassis Screws (7)
Figure 7-10.
Antenna Holder