Quick Call Ii (Astro P25 Digital Trunking And Conventional); Initiating A Quick Call Ii Transmission; Emergency Operation - Motorola APX MOBILE O9 User Manual

Hide thumbs Also See for APX MOBILE O9:
Table of Contents

Advertisement

2.7

Quick Call II (ASTRO P25 Digital Trunking and Conventional)

This feature allows the user to broadcast a series of distinct, recognizable tones before a voice
transmission from the dispatcher or a radio.
The broadcasting dispatcher or radio user can select this alert tone transmission to be sent to an
individual Talkgroup or over the entire system. Specific tone or series of tones are pre-programmed
into the radios to allow the dispatcher or supervisor to select a list of tones to broadcast before they
make their voice transmission. Each tone is distinctive to indicate different situation or different
broadcaster. The transmitting radio also plays back the tones for the broadcaster to listen.
NOTICE: The receiving radios must be configured with the Quick Call II tone in order for the
radio to sound the selected tone and also to sound a preconfigured alert tone after the selected
tone has sound.
2.7.1

Initiating a Quick Call II Transmission

Prerequisites: The broadcasting or transmitting radio must be pre-programmed to see the tone in the
Quick Call II tone list. The receiving radio must also be pre-programmed to decode the tone to
broadcast.
Procedure:
1
or to QCII, and press the Menu Select button directly below QCII.
2
or
to select the tone to broadcast.
3 Press the PTT to broadcast the selected tone, or press and hold the PTT to broadcast the
selected tone and transmit with your vocal transmission.
You hear the radio sounds the selected tone. You can begin your call after the tone ends.
4 Release PTT to listen.
2.8

Emergency Operation

The Emergency feature is used to indicate a critical situation. If the Orange button is preprogrammed
to send an emergency signal, this signal overrides any other communication over the selected channel.
Your radio supports the following Emergency modes:
Emergency Alarm
Emergency Call (Trunking Only)
Emergency Alarm with Emergency Call
Silent Emergency Alarm
Check with your dealer or system administrator for more information on the programming of this
feature.
Only one of the Emergency modes can be assigned to the preprogrammed Emergency button or the
Emergency footswitch.
68007024014-GK
Advanced Features
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 7500Apx 8500

Table of Contents