Custom Prefix; Enable/Disable Custom Prefix; Set Custom Prefix - Newland BS8060 Piranha User Manual

Custom Prefix

Enable/Disable Custom Prefix

If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot
exceed 11 characters.
For example, if barcode data is "123" and custom prefix is "AB", the host device will receive "AB123".
Disable Custom Prefix (default)

Set Custom Prefix

To set a custom prefix, scan the Set Custom Prefix barcode, the numeric barcodes that represent the
hexadecimal value of desired prefix(es) and the Save barcode.
Note: A custom prefix cannot exceed 11 characters.
Example: Set the custom prefix to "CODE" (Hex: 0x43/0x4F/0x44/0x45)
1. Scan the Set Custom Prefix barcode.
Scan the numeric barcodes "4","3","4","F","4","4","4" and "5" from Digit Barcodes (1D Scanner)
2.
section in Appendix.
3. Scan the Save barcode from Save/Cancel Barcodes (1D Scanner) in Appendix.
171
Set Custom Prefix
Enable Custom Prefix