Custom Suffix; Enable/Disable Custom Suffix; Set Custom Suffix - Newland BS8060 Piranha User Manual

Custom Suffix

Enable/Disable Custom Suffix

If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed
11 characters.
Enable Custom Suffix

Set Custom Suffix

To set a custom suffix, scan the Set Custom Suffix barcode and the numeric barcodes representing the
hexadecimal values of a desired suffix and then scan the Save barcode. Refer to ASCII Table in
Appendix for hexadecimal values of characters.
Note: A custom suffix cannot exceed 11 characters.
Example: Set the custom suffix to "CODE"
Check the hex values of "CODE" in the ASCII Table. ("CODE": 43, 4F, 44, 45)
1.
2. Scan the Set Custom Suffix barcode.
Scan the numeric barcodes "4", "3", "4", "F", "4", "4", "4" and "5" from Digit Barcodes (2D Scanner)
3.
in Appendix.
4. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.
Disable Custom Suffix
Set Custom Suffix
(default)
186