Newland BS8060 Piranha User Manual page 29

Batch Transmission, USB
Transmit Stored Data
The following feature is enabled automatically when the scanner is in USB Batch mode. Moreover, you
can scan the appropriate barcode below to enable or disable this feature for USB Asynchronous mode.
Verify Receipt of Data: The scanner will keep all the stored data after transmission, which offers users
the opportunity to verify if the data is properly received and to resend the data when needed. To delete all
stored data in the flash memory, hold down the Scan/Power Button and Delete/Reset Button at the same
time for 3 seconds or scan the Clear All Stored Data barcode or send the corresponding serial command
to the scanner.
Do Not Verify Receipt of Data: All the stored data will be automatically deleted after transmission.
Do Not Verify Receipt of Data (default)
Notes:
1. When the scanner switches from one operating mode to the other, it beeps along with corresponding
LED notification (For more information, see LED Notifications in Chapter 1)
2. Besides the method mentioned above, you can also hold down the Scan/Power button and Function
button at the same time for 3 seconds to toggle between the Bluetooth mode and USB mode.
15
Asynchronous Transmission, USB (default)
Verify Receipt of Data