Sound Notifications - Newland BS8060 Piranha User Manual

Sound Notifications

Turn sound notifications on or off by scanning the appropriate barcode below. After this feature is enabled,
the scanner beeps when one of the following events occurs:
1. The scanner is turned on.
2. The scanner resets.
3. A barcode is decoded (including good read for removing barcode data from the flash memory).
4. The scanner switched to the Bluetooth mode or USB mode.
5. Transmitting data over Bluetooth failed.
6. iOS soft keyboard is turned on or off.
7. Batch data transmission via Bluetooth or USB starts.
8. Batch data transmission via Bluetooth or USB is interrupted.
9. Batch data transmission via Bluetooth or USB is completed.
10. The paired Bluetooth device is unpaired from the scanner.
11. The scanner is turned off.
12. USB connection between the scanner and the host device established.
13. USB connection between the scanner and the host device lost.
14. Bluetooth connection between the scanner and the host device established or lost.
Sound Notifications On (default)
17
Sound Notifications Off