Code Id Prefix; Restore All Default Code Ids; Modify Code Id - Newland BS8060 Piranha User Manual

Code ID Prefix

Code ID can also be used to identify barcode type. Unlike AIM ID, Code ID is user programmable. Code
ID can only consist of one or two English letters.
Disable Code ID Prefix (default)

Restore All Default Code IDs

For the information of default Code IDs, see Code ID Table (1D Scanner) in Appendix.

Modify Code ID

Code ID of each symbology can be programmed separately. See the following example to learn how to
program a Code ID.
Example: Set the Code ID of Code 128 to "p"
Check the hex value of "p" in the ASCII Table. ("p": 70)
1.
2. Scan the Modify Code 128 Code ID barcode.
Scan the numeric barcodes "7" and "0" from Digit Barcodes (1D Scanner in Appendix..
3.
4. Scan the Save barcode from Save/Cancel Barcodes (1D Scanner) in Appendix..
173
Restore Default Code IDs
Enable Code ID Prefix