Usb Mode - Newland BS8060 Piranha User Manual

USB Mode

USB Mode
When the scanner is in the USB mode, you can select a desired protocol by scanning the appropriate
barcode below.
USB HID-KBW (default) USB COM Port Emulation
There are two types of data transmission via USB: Asynchronous transmission and Batch transmission.
(1) Asynchronous transmission (default): When the scanner is not connected to PC via USB cable,
scanned data will be stored in the flash memory. When the scanner is connected to PC via USB cable,
scanned data will be sent to PC directly.
(2) Batch transmission: Scanned data will be stored in the flash memory no matter whether the scanner
is connected to PC or not.
You can sync the data from the flash memory to your PC via USB by following the procedure described
below.
Step 1: Download CDC-Virtual COM Driver from Newland website at www.newlandaidc.com and Install it
on your PC.
Step 2: Connect the scanner to your PC with USB cable. The scanner beeps when the connection
between them is established.
Step 3: Open Notepad or Office Word on your PC and make sure that your cursor is always positioned in
it. Hold down the Function button on the scanner for 3 seconds or scan the Transmit Stored Data
barcode to start data transmission from the flash memory to your PC. The scanner beeps when the
transmission is completed.
14