Set Length Range For Standard 25 - Newland BS8060 Piranha User Manual

Set Length Range for Standard 25

The scanner can be configured to only decode Standard 25 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes Standard 25
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only Standard 25 barcodes with that length are to be decoded.
Set the Minimum Length
Example: Set the scanner to decode Standard 25 barcodes containing between 8 and 12
characters
1. Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8" from Digit Barcodes (2D Scanner) in Appendix.
2.
3. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.
4. Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2" from Digit Barcodes (2D Scanner) in Appendix.
5.
6. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.
135
Set the Maximum Length