Led Notifications - Newland BS8060 Piranha User Manual

LED Notifications

Red LED on
Green LED on
Red and green LEDs flash alternately
Red LED flashes
When the scanner is on, pressing the Scan/Power button and Delete/Reset button at the
same time for 3 seconds can display the battery level with the Charging/Battery LED.
Green LED on
Red and green LEDs on
Red LED on
When the battery voltage is too low, the scanner will beep with flashing red Charging/Battery LED. Please
charge it immediately before the scanner shuts down mandatorily. When it shuts down, please charge it
fully before turning it back on.
Green LED flashes
Red LED flashes
Red LED on
Blue LED flashes slowly with long OFF
state
Blue LED flashes slowly with long ON
state
Blue LED on
Blue LED flashes quickly
Red LED on
Red LED flashes quickly
Charging/Battery LED
Charging in progress.
Fully charged.
Battery not found.
Low battery alert.
Battery level is high.
Battery level is medium.
Battery level is low.
Good Read LED
Good read.
Data LED
There is data in flash memory.
Flash memory depleted.
Function LED
Bluetooth mode enabled,
connection
undiscoverable.
Bluetooth mode enabled,
connection established and the BS80 discoverable.
Bluetooth connection established.
Data transmission via Bluetooth in progress.
USB mode enabled.
Data transmission via USB in progress.
but no
established and
but no
Bluetooth
the BS80
Bluetooth
8