Enter Setup
Custom Prefix
Enable/Disable Custom Prefix
If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot
exceed 11 characters.
Enable Custom Prefix
Set Custom Prefix
To set a custom prefix, scan the Set Custom Prefix barcode and the numeric barcodes representing the
hexadecimal value(s) of a desired prefix and then scan the Save barcode. Refer to Appendix 4: ASCII
Table for hexadecimal values of characters. To view a setting example, see Appendix 5: Parameter
Programming Examples.
Note: A custom prefix cannot exceed 11 characters.
** Exit Setup
Set Custom Prefix
** Disable Custom Prefix
42