Set Terminating Character Suffix - Newland BS8060 Piranha User Manual

Set Terminating Character Suffix

The engine provides a shortcut for setting the terminating character suffix to CR (0x0D) or CRLF (0x0D,0x0A)
and enabling it by scanning the appropriate barcode below.
Terminating Character CR (0x0D)
To set a terminating character suffix, scan the Set Terminating Character Suffix barcode and the
numeric barcodes representing the hexadecimal value of a desired terminating character and then scan
the Save barcode. Refer to ASCII Table in Appendix for hexadecimal values of terminating characters.
Note: A terminating character suffix cannot exceed 7 characters.
Example: Set the terminating character suffix to 0x0A
1. Scan the Set Terminating Character Suffix barcode.
Scan the numeric barcodes "0" and "A" from Digit Barcodes (2D Scanner) in Appendix.
2.
3. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.
(default)
Set Terminating Character Suffix
Terminating Character CRLF (0x0D,0x0A)
188