Set Length Range For Code 93 - Newland BS8060 Piranha User Manual

Set Length Range for Code 93

The scanner can be configured to only decode Code 93 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes Code 93 barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only Code
93 barcodes with that length are to be decoded.
Set the Minimum Length
Example: Set the scanner to decode Code 93 barcodes containing between 8 and 12 characters
1. Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8" from Digit Barcodes (1D Scanner) in Appendix.
2.
3. Scan the Save barcode from Save/Cancel Barcodes (1D Scanner) in Appendix.
4. Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2" from Digit Barcodes (1D Scanner) in Appendix.
5.
6. Scan the Save barcode from Save/Cancel Barcodes (1D Scanner) in Appendix.
Set the Maximum Length
86