Scanner Switches - Ricoh 5510L Service Manual

14 June, 2002

5.2.2 SCANNER SWITCHES

Scanner Switch 00
No FUNCTION
MTF
0
0: Disabled 1: Enabled
Text/Photo separation in
1
halftone mode
0: Disabled 1: Enabled
Maximum transmittable
2-3
document length
Bit 3 2
0 0
0 1
1 0
1 1
OR processing in immediate
4
TX and copying (Standard
resolution)
0: Disabled
1: Enabled
Not used
5
OR processing in Memory TX
6
(Standard resolution)
0: Disabled
1: Enabled
Not used
7
Scanner Switch 01 - Not used (do not change any of these settings)
Scanner Switch 02 - Not used (do not change any of these settings)
Scanner Switch 03 - Not used (do not change any of these settings)
Scanner Switch 04 - Not used (do not change any of these settings)
Scanner Switch 05 - Not used (do not change any of these settings)
Scanner Switch 06 - Not used (do not change any of these settings)
Scanner Switch 07 - Not used (do not change any of these settings)
Scanner Switch 08 - Not used (do not change any of these settings)
Scanner Switch 09 - Not used (do not change any of these settings)
Scanner Switch 0A - Not used (do not change any of these settings)
Scanner Switch 0B - Not used (do not change any of these settings)
Scanner Switch 0C - Not used (do not change any of these settings)
Scanner Switch 0D - Not used (do not change any of these settings)
Scanner Switch 0E - Not used (do not change any of these settings)
Scanner Switch 0F - Not used (do not change any of these settings)
Normally keep this bit at 1 to get a good halftone
quality.
If the user wants to send very long documents
such as well logs, select the higher setting.
Setting
600 mm
1200 mm
Not used
Not used
0: The machine scans the document in 3.85
line/mm steps, then transmits or makes copies.
1: The machine scans the document in 7.7
line/mm steps. Each pair of lines goes through OR
processing before transmission or copy making.
Toner may be used up earlier if OR processing is
enabled.
Do not change these settings.
Do not change these settings.
5-39
BIT SWITCHES
COMMENTS