Digital Alert Systems DASDEC II User Manual page 96

Configure EAS_NET Client Connection
Once enabled, you can create configurations for up to 8 EAS NET clients. Each client can be independently
enabled and disabled, allowing an easy way to stop or restart a client for a specific region.
If no client configurations exist, or if you want a new one and less than 8 clients exist, click the
To edit an existing client interface, select the named client from the pull-down menu Select EAS_NET client
and edit the fields provided in the table underneath.
To delete a client configuration, select the client and click on
Interface.
To duplicate an existing client interface (a different name will be automatically generated; less than 8 clients
must exist), select the
client interfaces that are mostly the same as an existing one except for the IP address.
Careful! EAS NET client configuration addition, duplication, and deletion is immediate and
cannot be canceled.
Discussion: The screen shot below demonstrates an example client configuration. The controls are
described below. The example shows an EAS NET client interface configured to use Secure Copy to send
the alert information and audio files to a remote DASDEC II host. This DASDEC II would need EAS NET
Decode enabled to receive the alert.
During alert processing, the Operation Log will log the success or failure of the EAS NET
forwarding/origination action per client.
NOTE: Every client configuration is used for whichever action of alert forwarding and alert
origination is currently enabled by the toggles described above.
EAS NET uses a flexible set of LAN communication protocols to send EAS data to a remote device.
Generally, the remote device needs to have running software that understands EAS NET files and data
formats in order for anything useful to be triggered by an EAS NET event. All EAS NET protocols will send
an alert event data notification file or ASCII data string from the DASDEC II to the EAS NET remote server
host. Most protocols also allow for sending separate data files (like audio WAV files).
Various information fields must be configured to identify and correctly communicate to the EAS NET remote
client. Common to all are the following:
Client Interface Name - This text box allows the client interface to be given a descriptive name. These
names appear in the selection list.
Client Enable/Disable - This toggle provides a quick method for enabling and disabling the EAS NET
client.
Remote EAS NET Host IP Address - The field displays the IP address of the remote EAS NET host
where the EAS NET event info is sent.
EAS NET Event Transfer Protocol - Displays the Event Transfer protocol. This is simply the LAN
communication method used to send the alert event data. Depending upon the Event transfer protocol,
other configuration fields are necessary or optional. Some protocols require passwords; others use
90
Setup > Net Alerts > EAS NET Configure EAS NET Clients
button to create a new interface configuration.
button. This is the best way to create new
Digital Alert Systems: DASDEC User Manual
Client