Digital Alert Systems DASDEC II User Manual page 49

For a radio to be used by a decoder channel, the decoder must be set to the internal audio source that indicates
a radio is available (displayed per decoder under the Setup Audio > Decoder Audio page).
NOTE: It is important to tune the radios to stations that carry EAS alerts. This is a
fundamental part of setting up your DASDEC II for monitoring the Emergency Alert
System.
The chosen radio frequency settings are automatically recalled at boot time or whenever a software restart is
done. A numeric level indicator displays the strength of reception. FM, AM and NOAA band selection occurs
immediately. NOAA frequency selection occurs immediately upon button selection. Typed frequencies for AM
and FM must be submitted using the
As a convenience, the decoder channel associated with each radio tuner is displayed in an active web link. This
can be clicked to immediately traverse over into the Setup > Audio > Decoder Audio page.
Digital Alert Systems: DASDEC User Manual
Setup > Audio > Radio Tuners web page
button.
43