Digital Alert Systems DASDEC II User Manual page 68

5. Duplicate Alert Handling
6. EAS Code filters
7. FIPS Code filters
Each section is described below.
1. Decoder Forwarding Controls
Plus Package licensed DASDEC IIs have two text fields and 4 toggle boxes in this section. DASDEC II's
without broadcast features can omit some of the described options.
EAN/EAT alerts preempt in-progress alert announcements
This is part of the FCC specification, but some downstream hardware/software may not support
preemption correctly.
Block Origination and Manual Forwarding during in progress alert announcement
Block manual play-out of a new alert while another alert announcement is in progress.
Use EAS NET originating unit station ID when forwarding an EAS NET received alert.
Forwarding EAS Station ID
Type up to 8 characters in this text field to identify the Station ID for this DASDEC II. This code will be
included in all forwarded alerts, both manually forwarded and automatically forwarded alerts.
Forwarding Attention Signal Duration
Set the duration in seconds (from 8 to 25) of the attention signal tone played during alert forwarding.
Front Panel Button press will release Held alert
Allows front panel button to release an alert held pending GPI closure.
62
Setup > Decoder > Forwarding web page, top sections
NOTE: Forwarding Station ID can be different from Encoder Station ID.
Digital Alert Systems: DASDEC User Manual