To quick connect to the FEMA CAP Server, create a new client and follow the options in the screen
shot below.
Setup > Net Alerts > CAP Decode; Quick connect to FEMA CAP Server
98
4.10.3.1 Quick Connect to IPAWS CAP Server
Ensure that DNS is enabled (Setup >
Network > Configuration)
Type apps.fema.gov for the CAP server host
address and
IPAWSOPEN_EAS_SERVICE/rest/update
for the URL path
Enter your county and your state in your
FIPS list (And maybe some surrounding
counties)
Digital Alert Systems: DASDEC User Manual
Choose the IPAWS Open 2.0
Get Poll Protocol
(Last) When this says Connected you
are ready to decode CAP Alerts (You
may need to refresh the page)