Usb Serial 1 Through 4 - Digital Alert Systems DASDEC II User Manual

3. FIPS and EAS Codes filter configuration
Use this section to edit Activating FIPS and EAS Codes. If activating FIPS and/or EAS codes are configured,
then the serial port CG will ONLY be activated during alert origination or forwarding when the alert contains
at least one of the FIPS codes and matches the EAS code.
When
configuration section to allow editing. When finished editing codes, click.
return to the original web page.
REMEMBER to click

4.7.2 USB Serial 1 through 4

The USB Serial sub-pages have the same organization as the Main Serial port page and operate in the same
way. Each page corresponds to a different physical serial port.
These ports are supported using the Serial Gear CS-42042 USB to 4 Port RS232 Adapter. Other adapters may
work, but they must be based on the FTDI chipset. As with the Main Serial Port, make sure that the proper cable
54
Setup > Video/CG > Main Serial web page
or is selected, the screen refreshes with a FIPS and EAS Codes filter
to make any changes to this page apply.
Digital Alert Systems: DASDEC User Manual
button to