Event Email - Digital Alert Systems DASDEC II User Manual

To set the outgoing email server name using authentication (port 587):






To test if Email can actually be sent via the chosen Email server, type a valid Email address in the To: text
field and click Send Test Email. If this works, the chosen recipient should receive an Email.

4.5.2 Event Email

This page allows the user to the ability to have Event logs emailed either weekly or monthly, and to be
emailed when a successfully or failed login to the DASDEC II has occurred.
Emailing EAS Event Reports
Check either of the boxes to disable or enable Emailing of Event Reports either on a monthly or weekly
basis. If enabled, enter the Email address in the Email To: field.
Server Access Reports
Check either of the boxes to disable or enable Emailing of Server Access Reports. If enabled, enter the
Email address in the Email To: field.
36
Select Setup Email >Email Server. From this page you can set the name of the SMTP server for
outgoing Emails from the DASDEC II.
Enable the Use Authentication? Option.
Provide a username and password for authentication.
Enter a name in the text field after Outgoing Email Server and click Set & Test Mail Server Name.
The DASDEC II will attempt to contact this Email server.
If it succeeds, the message "OK: Contacted Email Server" will display under the name.
Setup > Email > Email Server: Using authentication
Digital Alert Systems: DASDEC User Manual