Digital Alert Systems DASDEC II User Manual page 71

Alert audio . . . front panel speaker (Front Panel Button Acknowledgment). All DASDEC II versions
provide a toggle to select whether the alert voice audio message is played during Front Panel button
acknowledgment of a current, active non-forwarded alert.
Setup > Decoder > Forwarding web page, Configure Pending Alert Acknowledgment
5. Configure Duplicate EAS Alert Handling for Decoder Auto-Forwarding
If an incoming EAS alert is determined to be an exact duplicate of a previously decoded alert, it is
completely discarded and a message is logged in the operation log. However, EAS alerts that are
duplicates except for Station ID or ORG code are stored as a decoded alert and can be optionally auto-
forwarded or held. Use the selector to choose the setting to control manual or auto-forwarding for these
alerts.
The Configure Update Policy for Active EAS Alerts option, allows you to expire an active alert when
a new alert is decoded and updates the previous alert. When enabled, you can choose what
requirements the new alert must have to expire the previous active alert.
Setup > Decoder > Forwarding Web Page, Configuring Handling of Duplicate Alerts
The following is an example of this situation: Two local radio stations are being monitored; both send
out a Monthly test for the same FIPS codes, and with the same start time and duration, but the stations
have changed the station ID. The alerts arrive several minutes apart. The DASDEC II has been set to
auto-forward Monthly tests to the given FIPS codes. The first decoded Monthly test is forwarded
automatically. The user has configured the duplicate alert handling to NOT auto-forward duplicate alerts
that differ in Station ID or ORG code. The second alert is decoded, but is held for manual forward.
6. Configure EAS code filters for Decoder Auto-Forwarding
Allow All EAS Codes. Use the toggle box to select ALL EAS codes or specific EAS codes to be
decoded and forwarded. When the toggle is checked, all EAS codes are allowed to auto-forward.
Choose from All EAS Codes:
This option is only available when specific EAS Code Forwarding is enabled. If so, select a set of EAS
Digital Alert Systems: DASDEC User Manual
65