Digital Alert Systems DASDEC II User Manual page 72

codes that will auto-forward. Then click to the right of the list of codes. All codes selected for
auto-forwarding will appear in the Current Decoder Auto-Forwarded EAS Codes field to the right.
OR
Add Emergencies, warnings, watches, tests, advisories.
These buttons provide a convenient way to add an entire group of related EAS codes for auto-
forwarding.
Remove Selected
To remove codes from the auto-forward list, select each EAS code line in the Current Decoder Auto-
Forwarded EAS Codes field and click .
Setup > Decoder Web Page, EAS Codes Type Auto-forwarding
7. Configure FIPS code filters for Decoder Auto-Forwarding
The FIPS configuration section is to set the location code for the DASDEC II. A FIPS code is a unique 6
digit code that covers every State or Territory in the United States, as well as every County or County
Equivalent area in the U.S. The FIPS ID is used for Required Weekly Tests for a decoder-only DASDEC
II.
Allow All FIPS Codes. Use the toggle box to select ALL FIPS codes or specific FIPS codes to be auto-
forwarded. When the toggle is checked, alerts with any FIPS codes are allowed to auto-forward. When
specific FIPS code auto-forwarding is enabled, selection options are presented to create a list FIPS
codes used for auto-forwarding.
FIPS Subdivision, State, and one or more Counties.
This option is only displayed when Specific FIPS Code Forwarding is enabled. Nine subdivisions for
each main FIPS region can be set. The State ID has a pop-down menu to select the State or territory.
County ID has a scrollable selection box to allow one or more County (or County equivalent area) to be
selected for addition to the Auto-Forwarded FIPS list.
OR
Select from Encoder Pool FIPS
Choose a set of FIPS location codes for the Subdivision, State (or territory) and the County (or County
Equivalent) which should be auto-forwarded. Then click . FIPS locations selected for automatic
66
Digital Alert Systems: DASDEC User Manual