Digital Alert Systems DASDEC II User Manual page 154

forwarding mode, to simply forward that alert all you need to do is click the
immediately put the alert on the air over what you are broadcasting. This alert can do a number of different things to
your broadcast, based on what type of alert it is and where the alert has come from.
2. Another thing you can do as an operator is review the alert before it is forwarded over your broadcast. This can be
done by click the
show up:
On this screen, there are a few things that you can do.

First of all, on the top of the screen, just below the red decoded alert part, you can review the alert that is going
to be forwarded over the air. This shows the text that could be sent out over a crawl on your broadcast. To
listen to the audio (if there is any) look at step 3.

Just below that, you can add a custom "translation" to the decoded message. For instance, if you selected the
Forwarding Text Translation + Custom bubble, here is what would show up:
148
button. After you press this button a screen similar to this will
Digital Alert Systems: DASDEC User Manual
button. This will