Digital Alert Systems DASDEC II User Manual page 158

2. Originating an Emergency Alert
In the beginning of the section, you configured your settings for setting up a general Encoded Emergency Alert. So
this will be pretty simple.
To create an originated alert to forward over your broadcast, go to
configure the options to how you want your alert to look. The options are put into six steps for you. An example of
setting up an alert is shown below in a screenshot:
To forward the alert over your broadcast, click on
Confirm the alert, and it will be sent out over your broadcast.
152
Encoder > Send Alert > General Alerts
Send Alert, and then you will be sent to a confirmation page.
Digital Alert Systems: DASDEC User Manual
and