Digital Alert Systems DASDEC II User Manual page 106

Add/Duplicate/Delete DVS644 (SCTE18) Client Interface Buttons: You can create configurations for up to 64
DVS644 (SCTE-18) CEAM (Cable Emergency Alert Message) clients.
If no client configurations exist, or if you want a new one, click the button to create a new
interface configuration.
To delete a client configuration, select the client and click on Interface.
Careful! DVS644/SCTE18 client configuration addition, duplication, and deletion are immediate
and cannot be canceled.
To duplicate an existing client interface (a different name will be automatically generated), select the
button. This is the best way to create many client interfaces that are mostly the same
except for the IP address.
Client Interface Configuration Table
Use the Client Interface Name text entry field to name each client.
Use the ENABLE Client Interface toggle box to enable/disable a client interface at any time. Each client can be
independently enabled and disabled allowing an easy way to stop or restart using a client for a specific region.
100
Digital Alert Systems: DASDEC User Manual