Basic Key Operation; Display - GPI -122 Instruction Manual

3.2 Basic Key Operation

Keys Description
Select the functions matching
.F1 ~ F4
the softkeys
1. Input number when numeric
input
0 ~ 9
2. Input characters when
alphabetic input
Input a decimal point
.
Input plus / minus sign
±
Power On / Off
Power
Enter into setting mode directly
★
End dialog and save setting to file
ENT
Escape to the previous menu or
ESC
mode; end dialog and not save

3.3 Display

The LCD could display 6 ines with 24 characters per line. In measurement mode, it
displays some common information in above 5 lines and displays soft functions in the
last line.
NOTE:
1. "Power" indicate
2. Basic measurement is
composed of angle and dist
and coordinate measurement
mode
Keys
1. Enter into angle measurement
mode (under basic measurement
ANG
mode)
2. Up arrow
1. Enter into dist and angle
measurment mode (under basic
DIST
measurement mode)
2. Down arrow
1. Enter into coordinate and angle
measurment mode (under basic
CORD
measurement mode)
2. Left arrow
1. Enter into menu mode (under
basic measurement mode)
MENU
2. Right arrow
15
Description