Fileman - GPI -122 Instruction Manual

16. Fileman

The instrument use a FAT16 file system to manage the data, all data obtained form
measuring can save to current measurement file. the extension name of measurement
file is *.MEA. all coordinates used by measurement can be picked up from current
coordinate file, the extentsion name of current coordinate file is *.COO.sometimes you
need to note an attribute of a point when you measure, the code file maybe a good helper,
the extension name of code file is *.COD. the extension of LINE-TYPE file for roadway
is *.LSH and *.LSV, *.LSV is vertical defining file for roadway, it always is loaded
after the *.LSH.
File operation is shown as follow.
F SVY.COD
I B.MEA
L B.COO
E BAA.MEA
V.LSH
S.COD
New DEL Read
Filename:A
B.S. Alph. Clear
F SVY.COD
I B.MEA
The data will be lost
L B.COO
E BAA.MEA
ESC Quit
V.LSH
ENT Continue
S.COD
New DEL Read
Pt.name DA
Code: B
T.H. 1.5000 *
HA: 24°32'20"
VA: 89°12'30"
Begin PgUp PgDn End
▲
1. The file operation dialog box is shown as the
picture of the left.
▼
Pick
.MEA
2.Press F1:【New】to create a new file. the type of
file can be changed by pressing F4:【Type】,after
type
you input the filename the file will be created.
▲
3. Press F2: 【DEL】 to delete a file for the instrument.
▼
deleting operation is dangerous ,for safty, you
Pick
should export the data first.
4. Press F3:【Read】to browse the highlight file. if
the file is coordinate file or measurement file then
e
the record is shown as the picture on the left.F1:
d
【Begin】 to show the first record.F4: 【End】 to show
56