This manual contains connection and viscosities and flow rates are features of operating instructions for the GM005 the oval rotor design. With low GM005 Series Meters are available Series meters with Pulse outputs. For pressure drop and high pressure rating with either;...
Installation 1] it is recommended that when setting up pipework for meter installations a Flow Inlet bypass line be included in the design. Bypass Line This provides the facility for a meter to be removed for maintenace without interrupting production. (See Fig.1) 2] Use thread sealant on all pipe Strainer...
Page 4
Service Instructions Rotor #1 Disassembly 2] Check that the smooth side of the Ensure that the fluid supply to the rotors (not the plug side) is facing meter is disconnected, and the line you when inserting the rotors, the pressure released before smooth side of the rotor is the...
Page 5
Meter Parts Listing Key: u Indicates recommended Spare Parts to stock Bold text indicates Stainless Steel Model Parts Item Rec. Part or Set Part Description Parts (Order from this column only) Off. MS298B Meter Body 1/2” BSP (Aluminium) MS298N Meter Body 1/2” NPT (Aluminium) MS337B Meter Body 1/2”...
Meter Specifications Meter Type Pulse Flow Ranges Litres/minute - US Gall/min Above 5 Centipoise 1 to 30/ 0.26 to 8 Below 5 Centipoise 3 to 25/ 0.8 to 6.60 Accuracy of Reading +/- 0.5% Maximum Viscosity* 1000 Centipoise Max. Operating Pressure 5500kPa/ 800 PSI/ 55 BAR Max.
Meter Dimensions Pulse Meter Dimensions Warranty Great Plains Industries, Inc. Limited Warranty Policy Great Plains Industries, Inc., 5252 East 36th Street North, Wichita, Kansas USA 67220-3205, hereby provides a limited one year warranty against defects in material and workmanship on all products manufactured by Great Plains Industries, Inc. This warranty shall extend to the purchaser of this product and to any person to whom such product is transferred during the warranty period.