Precautions When Performing Intersection - GPI -122 Instruction Manual

12.3 Precautions When Performing Intersection

In some cases it is impossible to calculate the coordinates of occupied point if the
unknown point and three or more known points are arranged on the edge of a single
circle. It is also impossible to calculate if the included angle between the known points
is too small. It is difficult to imagine that the longer the distance between the instrument
occupied and known points, the narrower the included angle between the known points.
Be careful for the points can easily be aligned on the edge of a single circle.
An arrangement such as shown below is desirable.
It is sometimes impossible to perform a correct calculation such as shown below.
When they are on the edge of a single circle, take one of the following methods:
(1)Move the instruction station as close as
possible to the center of the triangle .
(2)Measure one more known point which is not
on the circle.
(3)Perform a distance measurement on at least
one of the three points.
Unknown point
△▲：
Known point
○●：
45