GPI -122 Instruction Manual page 53

List(H element)
01Begin: 100
02Line: 150
03Circle: 170
04Spiral: 215
Save View
【Procedure of defining Horizontal point of intersection】
Curve define(H)
Mileage:
Azimuth: 0°00' 00"
Line Circle Spial
define(H)-Begin
Mileage:
N:
E:
B.S. Clear
N:(Pt.1)
E:
Radius:
A1:
A2:
B.S. Clear
List(H element)
01Begin: 100
02I.P.: 150
03I.P.: 170
04I.P.: 215
Save View
9. Max number of element is 20.press 【 ENT】 to pop
up the list box of all inputed element. Press F1:
【Save】to save all element to current
H-LINE-TYPE file and quit defining. Press F2:
【View】to browse the detailed information of a
Add
element, or to edit it.
1. If first pressing F4: 【 I.P.】 to select the method of
0.000
point of intersection ,then all input is I.P. latter.
I.P.
2. Input the Mileage and coordinates of start point.
1000
10
20
Enter
100
100
50
3. Input another I.P. one by one. Press【ENT】to
20
accept a dialog box.
20
Enter
4. Press【ESC】to stop inputing, then pop up a list
box of I.P. Press F1:【Save】to save all poins of
intersection to current V-LINE-TYPE file and quit
defining. Press F2:【View】to browse the detailed
Add
information of an I.P.,or to edit it.
52