Coordinates Setout Measurement - GPI -122 Instruction Manual

7.2 Coordinates Setout Measurement

After setting coordinates for the point to be Setout, the instrument calculates the Setout
HA and HD. By selecting the HA and then the HD Setout functions, the required
coordinate location can be Setout.
To get the Z coordinate, attach the target to a pole etc, with the same target height.
Back sight
station
【Procedure of coordinate Setout measurement】
–Menu–
1.Collection
2.Setout
3.Fileman
4.Program
5.parameter
6.Calibration
–Setout–
1.Setup Station
2.Setup BSS
3.Setout
4.Polar coordinate
5.Intersection
6.Input coordinate
Input point for setout
N:
E:
Z:
B.S. Clear Pop
0
Instrument
station
1. Press【MENU】in the basic measurement
▲
▼
2. Select " 3. Setout".
▲
▼
3. Input point coordinate that you need to setout. if
the point is in current coordinate file then you can
m
press F3:【Pop】to call the coordinate.
Enter
28
Distance
Point to be
Setout
Angle