Safety Standards For Laser ( Gpi-120 Series ) - GPI -122 Instruction Manual

 Do not short circuit of the battery. Fire could result.
 When this product encounters disturbance of severe Electrostatic Discharge, perhaps
it will have some degradation of performance like switching on/off automatically and
so on.
 Do not touch the instrument with wet hand. Electric shock could result.
 Do not stand or seat on the carrying case, and do not turn over the carrying case
arbitrarily, the instrument could be damaged.
 Be careful of the tripod tiptoe when setup or move it.
 Do not drop the instrument or the carrying case, and do not use defective belt, agraffe
or hinge. Instrument damage could result.
 Do not touch liquid leaking from the instrument or battery. Harmful chemicals could
cause burn or blisters.
 Please assemble the tribrach carefully, if the tribrach is not stable, series damage
could result.
 Do not drop the instrument or tripod, series damage could result. Before use it, check
the central screw is tight.

1.3 Safety Standards for Laser ( GPI-120 Series )

GP-120 series adopt the class of Laser Product according to IEC Standard Publication
60825-1 Amd. 2:2001. According this standard, EDM device is classified as Class 3R
Laser Product when reflectless measurement is selected, when the prism and reflective
sheet is selected as target, the output is equivalent to the safer class 1. Follow the safety
instructions on the labels to ensure safe use.
CAUTION: CLASS 3R LASER RADIATION WHEN OPEN
CAUTION: CLASS 2 LASER RADIATION WHEN OPEN
CAUTION
AVOID DIRECT EYE EXPOSURE.
DO NOT STARE INTO THE BEAM
6