Elevation Intersection - Coor.z - GPI -122 Instruction Manual

Intersection-result
N:
E:
Z:
Set ST SetA Rec
Intersection-result
N:
E:
Z:
SetA Rec
Intersection-result
N:
E:
Z:
Rec
12.2 Elevation Intersection – Coor.Z
Only Z （elevation） of an instrument station is dertermined by this measurement. Between
1 and 5 known points can be measured by distance measurement only.
Coor.Z-No.1
>Pt.name:
Code
T.H.: 1.000
* file list
Input Pop Info
6. Press F4:【dCoor】the coordinate of instrument
station will be shown. you can Press F1:【Set ST】
-0.004
to setup station and press F2:【Set A】to setup the
0.003
0.003
Azimuth of the instrument.
Coor
7. Setup station.
-0.004
0.003
0.003
Coor
8. Setup the azimuth of the instrument. and you can
press F3:【Rec】to save the coordinates to current
-0.004
measurement file.
0.003
0.003
Coor
【Procedure of elevation resection】
1. Input a known point.you can press F1: 【 Input】 to
input the point coordinate by coordinate, or you can
press F2:【Pop】to call an existing coordinates for
current coordinates file
Read
43