Graphic Control Panel Overview (Description) - GCC Technologies LaserPro X252RX User Manual

5.1.3 Graphic Control Panel Overview (Description)

The Control Panel
The control panel on the LaserPro X252RX & X380RX provides easy access to all of the manual
controls needed for cutting. The liquid crystal display (LCD), functional, directional and selection
buttons make navigating through the machine's manual controls easy to do.
LED INDICATOR LIGHTS
Three indicator lights on the LaserPro X252RX & X380RX's control panel are part of the system's
safety interlock system.
DOOR - The door light will illuminate when any of the following doors or function is not
working properly. The top lid, the pass through doors, the rear laser access panel and the
water flow sensors that ensures the flow of cooling water.
POWER - The power light will illuminate when the LaserPro X252RX & X380RX is powered
on.
LASER - The laser light will illuminate when the laser is active and in operation.
WARNING
•
DO NOT attempt to remove or modify any component of the safety interlock
system.
•
If at any time, any of the access doors are open and the "laser" LED is
illuminated, IMMEDIATELY unplugs the laser system and contact GCC
technical support for service instructions.
•
DO NOT operates the laser system if any component of the safety system is
malfunctioning.
DIRECTIONAL AND SELECTION BUTTONS
35
LED Indicator Lights
LCD Display Screen
Function Buttons
Directional and
Selection Buttons
232001240G(08)