Parallels Desktops For Mac Os Users - GCC Technologies LaserPro X252RX User Manual

9) At the Printer Sharing screen, select <Do not share this printer> and click Next
to continue.
10) Select <No> when asked if you want to print a test page and click Next to
continue.
11) Now the installation will proceed, if you get a Hardware Warning about the
software you are installing for this hardware has not passed Windows Logo
testing... simply click Continue Anyway to ignore this warning.
12) Congratulations, your printer driver has been successfully installed!
13) (This step is required only for USB connections) If you are using the X252RX &
X380RX's USB connection interface, then you will need to go to your Windows
Control Panel
and select properties. Go to the Ports menu and place a check next to GCC
USB0, then click OK.

4.2.3 Parallels Desktops for MAC OS Users

MAC users can use GCC LaserPro machines by purchasing the Parallels Desktop software
which allows you to install Windows OS in MAC computers and run Windows based software
under MAC computer and output with GCC print driver.
1) Purchase Parallels Desktops on its official website.
2) Install Parallels Desktops under Mac OS environment.
3) Read Software License Agreement and press "Accept" to continue installation
Printer and Faxes. Right-click on the X252RX & X380RX listing,
24
232001240G(08)