Carriage Free Page
The Carriage Free Page allows you to set whether the laser carriage is locked or free. If the
Carriage Free setting is set to <YES>, then you will be able to manually move the laser carriage
along the X and Y axis by hand with the top door open. Whereas setting the Carriage Free to
<NO> will lock the laser carriage and movement or positioning can only be done by the control
panel.
Carriage Free YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
/
Directional
Start / Stop
Auto Focus
▲ / ▼ Manual Focus
Buttons
☼ Navigating to this page:
Carriage Lock Page
Back to previous page
Save your current settings
Cycle Carriage Free between YES / NO
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-
axis)
- 41 -
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Carriage Free>
from the menu
Carriage Free Page
Function
232001240G(08)