GCC Technologies LaserPro X252RX User Manual page 55

File Save Mode Page
The Set File Save Mode Page allows you to set whether or not the LaserPro X252RX & X380RX
automatically deletes each job file after processing. Setting File Save to <NO> will automatically
and immediately delete each job file from the LaserPro X252RX & X380RX after the cutting
process. Setting File Save to <YES> will retain all job files on the LaserPro X252RX & X380RX,
even after each job has been processed.
File Save: YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
Start / Stop
Auto Focus
▲ / ▼ Manual Focus
Buttons
☼ Navigating to this page:
File Save Mode Page
Back to previous page
Save your current settings
Cycle File Save between YES / NO
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-
axis)
- 44 -
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <File Save Mode >
from the menu
Set File Save Mode
Page
Function
232001240G(08)