The Laserpro X252Rx & X380Rx Print Driver; Page Setup And Orientation - GCC Technologies LaserPro X252RX User Manual

5.2 The LaserPro X252RX & X380RX Print Driver
With the LaserPro X252RX & X380RX print driver successfully installed, you will need to adjust the printer
and page size default settings before you can begin editing and completing jobs. By doing so, you will be
setting the work area in your graphics software to match the LaserPro X252RX & X380RX's worktable area.
NOTE
Please make sure X252RX & X380RX is set to the default printer before proceeding to the page
and layout setup.
Ensure that the LaserPro X252RX & X380RX has been selected as the DEFAULT PRINTER. You can do so by
going into your Windows Control Panel
If LaserPro X252RX & X380RX is not selected as DEFAULT PRINTER, you may set it up through the graphics
software as well. The following is taking Corel Draw as example of how to set up LaserPro X252RX & X380RX
as the Printer.
From the primary menu, click FILE
1)
From the navigation bar Name, click X252RXRX & X380RXRX
2)

5.2.1 Page Setup and Orientation

The first thing you must do before working with the LaserPro X252RX & X380RX Print Driver will be to make
sure the page and layout settings are properly configured within your graphics software. You will need to access
and edit the Page Setup or Layout page of your graphics software to set your graphics software's page layout to
match the LaserPro X252RX & X380RX's work table's dimensions and orientation.
From your graphic software's Page Setup page:
Set the page orientation in the graphics software to Landscape mode.
Set page size horizontal length to 635 mm (25 inches) and vertical height to 458 mm (18 inches) for
X252RX model, and 960mm (38 inches) x 610mm (24 inches) for X380RX model.
Corel Draw Example (Page Setup and Orientation)
The following is an example of how to set the Page Setup and Orientation in the graphics software. CorelDraw is
the designated graphics software used for this example. For other graphics software, you will need to access the
corresponding Page Setup page.
From the primary menu, click LAYOUT
3)
From the navigation bar on the left, click DOCUMENT
4)
Ensure that NORMAL PAPER and LANDSCAPE are selected.
5)
Ensure the Paper Width and Height dimensions match the LaserPro X252RX & X380RX's work
6)
table dimensions of 635 mm (25 inches) and 458 mm (18 inches).
Printers and Faxes.
X252RX: 635x458 mm (25"x18")
X380RX: 966x610 mm (38"x24")
PRINT SETUP.
PAGE SETUP.
50
OK
PAGE SIZE.
232001240G(08)