GCC Technologies LaserPro X252RX User Manual page 40

Carriage / Work Table Adjustment Page
The Carriage / Work Table Adjustment Page allow you to manually increase and decrease the
height of the work table (Z-axis). In addition, you can manually adjust the Y-axis and X-axis of the
laser carriage.
Relevant Buttons
F1 (Back)
F3 (Down)
F4 (Up)
/ Directional
/ Directional
Start / Stop
Auto Focus
▲ / ▼ Manual Focus Buttons
Carriage / Work Table Adjustment Page
Back to previous page
Manually decrease the height of the work table
(Z-axis)
Manually increase the height of the work table
(Z-axis)
Manually adjust the Y-axis position of the laser
carriage
Manually adjust the X-axis position of the laser
carriage
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-
axis)
39
☼ navigating to this page:
Main Work Page
Carriage / Work Table
Adjustment Page
Function
232001240G(08)
Press , , , , or F3