The Control Panel; The Touch Key Panel - GCC Technologies AFR-24S User Manual

Chapter 3 The Control Panel
This chapter describes the button operations with the LCM menu flowcharts of RX II series.
When the cutting plotter is ready for use as described in Chapter 1 & 2, all functions are
under default parameters.

3.1 The Touch Key Panel

Key
LCD Screen
Power LED
4 Arrow Keys
ENTER
PAUSE/RESUME
ON/OFF LINE
OFFSET
FORCE
SPEED
< Touch Key Panel on RX II series >
Function
To display functions and error messages.
To indicate the power status ( light up: power on; light off: power off )
To move position, select function, or change setting.
To set item or register the immediately preceding input value.
To temporarily halt cutting process or to continue
To switch modes, stop cutting job, or abort changes of settings.
To adjust the value of blade's offset.
To adjust the value of cutting force.
To adjust the value of cutting speed and quality.
AFR-24S User Manual
62