Table of Contents
Advertisement
Chapter 3 The Control Panel
This chapter describes the button operations with the LCM menu flowcharts of Jaguar V. When the
cutting plotter is ready for use as described in Chapter 1 & 2, all functions are under default parameters
3.1 The LCD Panel
SPEED
MISC
TOOL SELECT
Key
Function
LCD Screen
To display functions and error messages.
Power LED
To indicate the power status (light up: power on; light off: power off)
Four Arrow Keys
To move position, select function, or change setting.
ENTER
To set item or register the immediately preceding input value.
PAUSE/RESUME
To temporarily halt cutting process or to continue
ON/OFF LINE
To switch modes, stop cutting job, or abort changes of settings.
OFFSET
To adjust the value of blade's offset.
FORCE
To adjust the value of cutting force.
SPEED
To adjust the value of cutting speed and quality.
CUT TEST
To perform cutting tests on different media.
DATA CLEAR
To clear up buffer memory.
TOOL SELECT
To select tools.
MISC
To set up functions.
FORCE
OFFSET
DATA CLEAR
CUT TEST
POWER
ON/OFF
PAUSE / RESUME
LINE
AFJ-24S User Manual
ENTER
59
Advertisement
Table of Contents
