Table of Contents
Advertisement
Click OK to complete the paper size adjustment.
7)
TIP
Instead of manually selecting the Landscape and setting the Paper Width and Height,
you can simply click the Set From Printer function and CorelDraw will automatically set
the proper orientation and dimensions based on LaserPro X252RX & X380RX's work
table. (X252RX & X380RX must be set as the default printer prior to doing this.)
5.2.2 Color Management
LaserPro driver uses pen color settings to control laser cutting parameters. In addition to having your Page
Setup and Orientation properly set in your graphics software, you will also need to make sure Color
Management is DISABLED prior to working with the LaserPro X252RX & X380RX Print Driver. If you do not
properly
From your graphic software's Color Management page:
Disable Color Management or set Color Management to Off.
Corel Draw Example (Color Management)
The following is an example of how to properly disable Color Management in the graphics software. CorelDraw is
the designated graphics software used for this example. For other graphics software, you will need to access the
corresponding Color Management page.
51
232001240G(08)
Hide quick links:
Advertisement
Table of Contents
