Safety During Operation; Safety During Maintenance - Optimum OPTIdrill DH 35V Operating Manual

protective glasses or face guard,

protective gloves,

safety shoes with steel toe caps,

ear protection.

Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Soiled personal protection equipment that may be contaminated may cause illness.
Clean your personal protective equipment

after each use,

regularly once a week.
Personal protective equipment for special works
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
work where your face and eyes are exposed to hazards.
Wear protective gloves when handling pieces with sharp edges.

Wear safety shoes when you assemble, disassemble or transport heavy components.
1.13

Safety during operation

We provide information about the specific dangers when working with and on the geared drill in
the descriptions for these types of work.
WARNING!
Before switching on the geared drill make sure that there are

no dangers generated for persons,

no objects are damaged.
Avoid any unsafe work methods:
Make sure that your operation does not create a safety hazard.

The rules specified in these operating instructions must be observed during assembly,

operation, maintenance and repair.
Do not work on the geared drill if your concentration is reduced, for example, because you

are taking medication.
Observe the accident prevention regulations issued by your Employers Liability Insurance

Association or other supervisory authorities applicable to your company.
Inform the supervisor about all hazards or faults.

Stay on the geared drill until the machine completely stopped moving.

Use the specified personal protective equipment. Ensure you wear close-fitting clothing

and, if necessary, a hairnet.
Do not use protective gloves when drilling.

1.14

Safety during maintenance

Inform the operators in good time of any maintenance and repair works.
Report all safety relevant changes and performance details of the geared drill or their opera-
tional behavior. Any changes must be documented, the operating instructions updated and
machine operators instructed accordingly.
EN
DH35V
16 Translation of original instruction
Safety
Version 1.0.2 - 2020-07-06