Operation Instructions; Button Control - FDS FD201CV-C-1 Installation And Operation Manual

Operation Instructions

The FD201CV-C-1 is continuously on but can be de-energized by removing power from
the entertainment system. No pilot or aircrew action is necessary during flight or ground
operation.
The operator will be able to change the video output from the FD201CV-C using the
video source select button on the display.
When applying 28VDC power, the display will turn on and look for a valid input on the
last known source. If no input is found, the display will go to standby mode. Pressing the
Select button will select new video input.
Button Controls
Located on the front bottom left of the FD201CV-C-1 are 8 buttons.
BUTTON
PWR
MENU
AUTO
SCE
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD201CV-C-1
DESCRIPTION
Turns ON/OFF the system.
Activates the OSD menu or goes to previous menu.
Auto-adjustment in RGB.
Moves the highlight icon up to the function that user
wants.
Moves the highlight icon down to the function that user
wants.
Decreases the adjustment of the selected function.
Increases the adjustment of the selected function.
Selects the Input Signal among analog RGB/S-
Video/Composite.
Revision Date:
Rev:
05/05/2017
E
Page 9 of 16
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com