Page 3 of 16 General Information The FD220CV-C-1 is a panel mounted 22” monitor. Built with retrofit aircraft integration in mind, this display can switch between five video input sources using an infrared remote control or the buttons located on the top of the unit.
DO-160, Sec 7, Cat B Installation Instructions All cabin equipment, such as the FD220CV-C-1, should be installed on a non-essential bus and have a dedicated circuit breaker. It is a requirement that a switch be installed in the cockpit so that the pilot can de-energize the system should it become necessary.
The FD220CV-C-1 is continuously on but can be de-energized by removing power from the video system. No pilot or aircrew action is necessary during flight or ground operation. The operator will be able to change the video output from the FD220CV-C-1 using the video source select button on the display.
01/10/2017 MAN – FD220CV-C-1 Page 14 of 16 Technical Support Should you have any questions concerning this product or other FDS Avionics Corp. products, please contact our Product Support representatives at (470) 239-7421. FDS Avionics Corp. 6435 Shiloh Road Alpharetta, GA 30005...
Limited Warranty All FDS Avionics Corp. (FDS) products are warranted to be free from material or manufacturing defects for a period of 24 months from the date of shipment for General Aviation customers or 12 months from the date of shipment for Government/Special Mission customers.
Need help?
Do you have a question about the FD220CV-C-1 and is the answer not in the manual?
Questions and answers