Table of Contents
Advertisement
Rear View with Connectors
Operation Instructions
The FD141CV-C-1 is continuously on but can be de-energized by removing power from the
video system. No pilot or aircrew action is necessary during flight or ground operation.
The operator will be able to change the video display on the FD141CV-C-1 by pressing the
computer button to select the VGA or DVI input as programmed. HD-SDI inputs will be
displayed.
Connecting the SDI input to the output of the attached quad box on the unit will enable the
operator to view any image from any of the connected screens on board the aircraft.
When applying 28VDC power, the display will turn on and look for a valid input on the last
known source. If no input is found, the display will go to standby mode. Pressing the Select
button will select new video input.
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD141CV-C-1
Revision Date:
Rev:
05/04/2017
B
Page 9 of 15
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Advertisement
Table of Contents
