Operation Instructions; Button Control - FDS FD141CV-C-6 Installation And Operation Manual

Operation Instructions

The FD141CV-C-6 is continuously on but may be de-energized by removing power from
the display system. No pilot or aircrew action is necessary during flight or ground
operation.
When applying 28VDC power, the display will turn on and look for a valid input. If no
input is found, the display will go to standby mode. The operator will be able to change
the video output from the FD141CV-C-6 using the video source select switch on the LCD
monitor.
Button Controls
Located on the bottom front of the FD141CV-C-6 are 8 buttons, and a backlit NVG
Rocker Switch. Functionality for these buttons are as follows:
BUTTON
M Activates the OSD menu or goes to previous menu.
Moves the highlight icon down to the function that user
wants.
Moves the highlight icon up to the function that the user
wants.
Moves the highlight icon left to the function that the user
wants.
Moves the highlight icon right to the function that the user
wants.
Auto-adjusts the display's size and position.
A
S Cycles through source inputs.
P Powers monitor on and off.
Rocker This rocker switch, switches between daylight and night
Switch vision.
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD141CV-C-6
DESCRIPTION
M
Revision Date:
Rev:
04/27/2017
B
Page 9 of 34
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com