Table of Contents
Advertisement
Operation Instructions
The FD102CV-C-7-L/R is continuously on but can be de-energized by removing power
from the system. No pilot or aircrew action is necessary during flight or ground operation.
The operator will be able to change the video input from the FD102CV-C-7-L/R using the
rocker switch on the LCD monitor.
When applying 28VDC power, the display will turn on and look for a valid input on the
last known source. If video is not displayed when power is applied, then increase the
backlight brightness using the Right Arrow on the 5 button keyboard as the first step in
troubleshooting.
Button Controls
Located at the bottom of the FD102CV-C-7-L/R are five buttons.
Operations for both switches and buttons are as follows:
Day/NVG – Rocker switch turns night vision on and off
½ - Rocker switch allows user to switch from one HDSDI input connection to the other.
BUTTON
M
P
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD102CV-C-7 (L/R)
DESCRIPTION
Menu - Used to change the configuration of the picture
settings (Backlight, Brightness, Contrast, Saturation, Hue,
etc.)
Left Arrow – Adjusts Down
Right Arrow – Adjusts Up
Arrow Down – Scrolls Down
Power Button
Revision Date:
Rev:
05/05/2017
B
Page 8 of 12
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Advertisement
Table of Contents
