Sftp Configuration Examples; Password Authentication Enabled Sftp Server Configuration Example - HPE FlexNetwork 7500 Series Security Configuration Manual

[SwitchB] ssh server enable
# Assign an IP address to VLAN-interface 2.
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] ip address 192.168.1.40 255.255.255.0
[SwitchB-Vlan-interface2] quit
# Set the authentication mode to AAA for user lines.
[SwitchB] line vty 0 15
[SwitchB-line-vty0-15] authentication-mode scheme
[SwitchB-line-vty0-15] quit
# Create a local device management user named client001. Authorize the user to use the SSH
service and assign the network-admin user role to the user.
[SwitchB] local-user client001 class manage
[SwitchB-luser-manage-client001] service-type ssh
[SwitchB-luser-manage-client001] authorization-attribute user-role network-admin
[SwitchB-luser-manage-client001] quit
# Create an SSH user named client001. Specify the publickey authentication method for the
user and specify client256 as the PKI domain for verifying the client's certificate.
[Switch] ssh user client001 service-type stelnet authentication-type publickey assign
pki-domain client256
4. Establish an SSH connection to the Stelnet server based on the 128-bit Suite B algorithms:
# Establish an SSH connection to the server at 192.168.1.40.
<SwitchA> ssh2 192.168.1.40 suite-b 128-bit pki-domain client256 server-pki-domain
server256
Username: client001
Press CTRL+C to abort.
Connecting to 192.168.1.40 port 22.
Enter a character ~ and a dot to abort.
******************************************************************************
* Copyright (c) 2010-2015 Hewlett Packard Enterprise Development LP
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<SwitchB>

SFTP configuration examples

Unless otherwise noted, devices in the configuration examples operate in non-FIPS mode.
When the device acts as an SFTP server operating in FIPS mode, only ECDSA and RSA key pairs
are supported. Do not generate a DSA key pair on the SFTP server.
Password authentication enabled SFTP server configuration
example
Network requirements
As shown in Figure 101:
348
*
*
*